STEP 2: You can now begin the mounting process,
starting with the beadlock side of the rim and inserting
it into the tire. You will want to get the bead of the tire in
the center divot of the rim to give you the most room for
movement.
STEP 3: Use a pair of tire spoons to help insert the rim
into the tire for the last few inches.
STEP 4: With the rim completely in the tire, flip the rim/
tire over to begin installing the beadlock ring. We found
that setting the rim onto a smaller-diameter rim or bucket
to get the wheel you are working on off the ground will
help with aligning the tire bead onto the new rims.
STEP 5: You will now maneuver the tire around the rim
until it sits flush against the clamping area. Now that the
tire is correctly seated onto the beadlock clamping area,
you can set the ring into place, aligning the mounting
holes.
STEP 6: With the ring in place, add a small amount of
anti-seize or equivalent lubricant onto the hardware. This
prevents any seizing of the bolt threads in the wheel, then
start installing the supplied bolts and washers